tarm 2.5 Shownet - DEMO UNIT - SLIGHTLY USED
1.487,50 € incl. 19% VAT
DEMO UNIT - SLIGHTLY USED
The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'626 mW after optics.
The tarm 2.5 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 2.5 comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The benefits include:
- 2'626 mW guaranteed output power
- a very fast maximum scan speed of 45kpps ILDA 8°
- high-precision diode arrays provide an excellent beam divergence of less than <0.9 mrad for a low beam diameter
- pure diode laser
- novel method for increasing the beam precision of the single-mode diodes
- beautiful colors and good color fading
- the tarm 2.5 impresses with very bright 638 nm single mode red
- trim pots for adjusting color intensity
The tarm 2.5 laser has great beam specifications with a diameter of ca. ca. 3.5 mm and a beam divergence of less than <0.9 mrad (full angle).
It is equipped with a bright red (703 mW / 638 nm), a green (683 mW / 520 nm), and a blue (1'240 mW / 450 nm) diode laser source.
It comes with fast 45kpps ILDA 8° Scanners
This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.
The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.
+ Integrated ShowNET incl. free laser show software
The tarm 2.5 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 2.5 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
Features
- a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
- high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
- pure diode laser
- novel method for increasing the beam precision of the single-mode diodes
- beautiful colors and good color fading
- trim pots for adjusting color intensity
DEMO UNIT - SLIGHTLY USED
Technical Information
| Guaranteed power at aperture: | 2'626 mW |
| Power red: | 703 mW / 638 nm |
| Power green: | 683 mW / 520 nm |
| Power blue: | 1'240 mW / 450 nm |
| Beam specifications (full angle): | ca. 3.5 mm / <1.0 mrad |
| Laser sources: | Diode |
| Laser class: | 4 |
| Operation modes: | ILDA |
| Scanner: | 45 kpps@8° ILDA |
| Scan angle max.: | 45° max. (@30 kpps) |
| Accessories: | key, power cable, manual, interlock connector |
| Power supply: | 85 V - 250 V / AC |
| Power consumption: | 100 W |
| Dimensions: | 220 x 220 x 150 mm (L x W x H) |
| Weight: | 7 kg |
| R Number | 93504 |