tarm 11 FB4 - only 1 device available

by tarm
Save 55%
13.921,81 €
6.200,00 €excl. VAT
7.378,00 € incl. 19% VAT
Availability: in stock

Used device but fully working and refurbished. Many scratches at housing.

 

The tarm 11 show laser projector is a pure diode solutionwith full analog color modulation and already integrated Pangolin FB4 Quickshow 'Max' network interface. 

  • 11'000 mW output power
  • network interface Pangolin FB4 Quickshow 'Max' is already integrated
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm 11 impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

The projector has good specifications with a beam diameter of ca. 4 mm and a beam divergence of less than 1.0 mrad (full angle). It is equipped with a red (2'800 mW / 638 nm), a green (2'900 mW / 520 nm), and a blue (6'000 mW / 450 nm) diode laser source.

The tarm 11 devices have very fast scanners, running at 45 kpps@8° ILDA and scanning a maximum scan angle of 50° (@30 kpps). These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The housing of the tarm 11 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.

The tarm 11 is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.



Pangolin FB4 Quickshow 'Max':

The tarm 11 FB4 show laser has an integrated Pangolin FB4 interface. The Pangolin FB4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software (available as separate upgrade license). Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.

Features of Pangolin FB4 Quickshow 'Max' are:

  • Full Ethernet control
  • Stand-alone SD memory card
  • Full color OLED display
  • Support for DMX and ILDA

The integrated full color OLED display provides various setting options:

  • Projector settings
  • Network settings
  • Color palette settings
  • Geometric corrections
  • Safety settings
  • etc.

The Pangolin FB4 'Max' runs the Pangolin Quickshow laser control software and offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.

For network control:

Just connect a network cable (CAT5) from your computer, running Pangolin Quickshow (free software download on pangolin.com), to the network port of the Pangolin FB4.

For DMX512 control:

Just connect a DMX512 cable (XLR 5pin) from your DMX console or DMX interface to the DMX IN connector of the Pangolin FB4.

With SD-memory:

Create content in Pangolin software and then export this content to the onboard SD-memory (included in delivery). It is possible to playback the content from the SD-memory automatically, without the need for a computer. 

Used device but fully working and refurbished. Many scratches at housing.

Additional Information

Total Power typical: 11'000 mW
Power Red: 2'800 mW / 638 nm
Power Green: 2'900 mW / 520 nm
Power Blue: 6'000 mW / 450 nm
Beam Specifications (full angle): ca. 4 mm / <1.0 mrad
Laser Sources: Diode
Operation Modes: Quickshow incl. Pangolin FB4 MAX: ILDA, DMX, NET and SD Card slot
Scanner: 45 kpps ILDA 8°
Scan Angle max.: max. 50°
Accessories: power cable, manual, interlock connector
Power Supply: 85 V - 250 V / AC
Power Consumption: 280 W
Dimensions: 320/260/140 mm
Weight: 14 kg
R_Number 92864