tarm 11 FB4 CT - EX RENTAL- only 1 device available

by tarm
Save 44%
13.920,00 €
7.800,00 €excl. VAT
9.282,00 € incl. 19% VAT
Availability: in stock

Ex-rental device, fully working and refurbished by manufacturer. Some traces of usage - deliverd with flightcase.

The tarm 11 FB4 CT show laser projector is a pure diode solution with CT-6210 LAS Turboscan scanner upgrade, full analog color modulation and already integrated Pangolin FB4 Quickshow 'Max' network interface. 

  • 11'000 mW output power
  • network interface Pangolin FB4 Quickshow 'Max' is already integrated
  • a very fast maximum scan speed of 60 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm 11 FB4 CT impresses with a very bright 639 nm red
  • internal switch for LAN connections
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

The projector has good specifications with a beam diameter of ca. 4 mm and a beam divergence of less than 1.0 mrad (full angle). Power setup : see bottom information listing

This Tarm 11 FB4 CT-6210 LAS Turboscan is running at 60 kpps@8° ILDA and scanning a maximum scan angle of 60°. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.

The housing of the tarm 11 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.



Pangolin FB4 Quickshow 'Max':

The tarm 11 FB4 show laser has an integrated Pangolin FB4 interface. The Pangolin FB4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software (available as separate upgrade license). Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.

Features of Pangolin FB4 Quickshow 'Max' are:

  • Full Ethernet control
  • Stand-alone SD memory card
  • Full color OLED display
  • Support for DMX and ILDA

The integrated full color OLED display provides various setting options:

  • Projector settings
  • Network settings
  • Color palette settings
  • Geometric corrections
  • Safety settings
  • etc.

The Pangolin FB4 'Max' runs the Pangolin Quickshow laser control software and offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.

For network control:

Just connect a network cable (CAT5) from your computer, running Pangolin Quickshow (free software download on pangolin.com), to the network port of the Pangolin FB4.

For DMX512 control:

Just connect a DMX512 cable (XLR 5pin) from your DMX console or DMX interface to the DMX IN connector of the Pangolin FB4.

With SD-memory:

Create content in Pangolin software and then export this content to the onboard SD-memory (included in delivery). It is possible to playback the content from the SD-memory automatically, without the need for a computer. 

 

Ex-rental device, fully working and refurbished by manufacturer. Some traces of usage - deliverd with flightcase.

Additional Information

Total Power typical: 11'000 mW
Power Red: 2'940 mW / 639 nm
Power Green: 2'960 mW / 520 nm
Power Blue: 6'100 mW / 450 nm
Beam Specifications (full angle): ca. 4 mm / <1.0 mrad
Laser Sources: Diode
Operation Modes: Quickshow incl. Pangolin FB4 MAX: ILDA, DMX, NET and SD Card slot
Scanner: CT-6210H LAS Turboscan - 60kpps ILDA 8°
Scan Angle max.: max. 60°
Accessories: power cable, manual, interlock connector, flightcase
Power Supply: 85 V - 250 V / AC
Power Consumption: 280 W
Dimensions: 320/260/140 mm
Weight: 14 kg
R_Number
93328