RTI PIKO RGB 20 CT - only 1 unit available

by RTI
Save 55%
29.750,00 €
13.500,00 €excl. VAT
16.065,00 € incl. 19% VAT
Availability: in stock

B-stock ex-demonstration model. Rarely used. Like new.

 

The RTI PIKO RGB 20 CT-6210 is made in Germany and a compact show laser system in a rugged, dust-proof housing that is ideally suited for demanding show laser applications.

Among many advantages are:

  • High-precision diode arrays and excellent divergence. 4 mm apertures ensure low interia and enable an extreme scan speed
  • guaranteed output power after optics: 17'400 mW
  • novel method for increasing the beam precision of the single-mode diodes
  • a very bright and highly visible red with 3'600 mW at 638 nm
  • two blue diode laser modules for more color nuances and higher visibility (4'000 mW / 450 nm & 4'400 mW / 462 nm)
  • newly developed electronics with calibration capability via a browser interface
  • the emergency stop signal can be looped through several RTI PIKO systems, which means that one emergency stop is sufficient for all devices
  • quality product, made in Germany
  • ideal for indoor and outdoor applications, concerts, festivals, large events, graphics projections and long-distance projections

 

The RTI PIKO RGB 20 impresses among other things with a guaranteed RGB output power of 17'400 mW. 3'600 mW at 638 nm for a very bright red combined with 5'200 mW / 520 nm green and two blue diode laser modules (4'000 mW / 450 nm & 4'400 mW / 462 nm) for more color nuances and higher visibility. The high-precision diode arrays allow a low beam diameter and at the same time an excellent divergence of < 1.0 mrad. The beam precision of the single-mode diodes was significantly increased by a new method. The diode laser modules are manufactured by Ray Technologies in Germany. Small 4 mm apertures ensure a low inertia, which in turn enables extreme scan speeds. The CT scanners with LAS Turboscan drivers reach a maximum of 60 kpps@8° ILDA and a maximum scan angle of 60° at 35 kpps.

By default, the RTI PIKO RGB 20 is controlled via ILDA and is equipped with newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN.
 
Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI PIKO RGB 20 is suitable indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems.

 

B-stock ex-demonstration model. Rarely used. Like new.


Additional Information

Guaranteed power at aperture: 17'400 mW
Power Red: 3'600 mW / 638 nm
Number of single red diodes: 32
Power Green: 5'200 mW / 520 nm
Number of single green diodes: 8
Power Cyan: 4'400 mW / 462 nm
Power Blue: 4'000 mW / 450 nm
Number of single blue diodes: 8
Beam Specifications (full angle): ca. 4.5 mm / <1.0 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA
Scanner: CT-6210H : 60kpps ILDA 8°
Scan Angle max.: max. 60°
Accessories: Browser interface (integrated), manual, power cable
Power Supply: 85-250 V AC 50/60 Hz
Power Consumption: 500 W
Dimensions: 250 x 411 x 265 mm
Weight: 20 kg
R_Number 92667