tarm 6 ShowNet - FIRST PROTOTYPE- 6,25W RGB (USED)
3.925,81 € incl. 19% VAT
First Prototype / V1 from Tarm 6. Tested device 1,85W / 638 nm; 1,57W / 520 nm; 2,83W/ 450 nm (Shows Scratches and little damages)
Product Details
The tarm 6 ShowNet show laser projector is a pure diode, full color whitelight RGB laser system with full analog color modulation and already integrated ShowNet network interface.
The tarm 6 ShowNet units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX or automatic mode.
The tarm 6 ShowNet comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The whole projector is built with Sealed Housing technology and thus maintenance intervals can be kept very low.
+ Integrated ShowNET incl. free laser show software
The tarm 6 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld tarm 6 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.
Hardware features of integrated ShowNET:
| X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis) |
| Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green |
| DMX512 input and output (non-isolated) |
| 100 Mbit Ethernet port |
| Flexible IP address setting: static address, DHCP or AutoIP |
| Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN |
| standalone operation and DMX IN/OUT via DMX-Adapter |
| Maximum scan speed ~100.000 points per second |
| Up to 16 devices can be used in parallel for multiprojector laser shows |
| Built-in ArtNet-to-DMX converter |
First Prototype / V1 from Tarm 6. Tested device 1,85W / 638 nm; 1,57W / 520 nm; 2,83W/ 450 nm (Shows Scratches and little damages)
Additional Information
| Guaranteed power at aperture: | 6,0W |
| Power red: | 1,85W / 638 nm |
| Power green: | 1,57W / 520 nm |
| Power blue: | 2,83W / 450 nm |
| Beam specifications (full angle): | ca. 3.5 mm / <1.0 mrad |
| Laser sources: | Diode |
| Laser class: | 4 |
| Operation modes: | ShowNET interface, DMX, ILDA |
| Scanner: | 45 kpps@8° ILDA |
| Scan angle max.: | 50° max. (@30 kpps) |
| Accessories: | key, power cable, manual, interlock connector, Case |
| Power supply: | 85 V - 250 V / AC |
| Power consumption: | 230 W |
| Dimensions: | 320 x 260 x 140 mm (L x W x H) |
| Weight: | 14 kg |
| R Number | 93506 |